Quick Start
R&S
®
ESRP
29
User Manual 1175.7445.02 ─ 08
MEAS
Provides the measurement functions, for example:
●
the bargraph measurement (in Receiver mode)
●
the scan and final measurement (in Receiver mode)
●
the AF demodulation (in Receiver mode)
●
IF analysis (in Receiver mode with option R&S
ESRP-K56)
●
the channel power and ACLR measurement (in Spectrum mode)
●
the occupied bandwidth measurement (in Spectrum mode)
●
the Spectrum Emission Mask (SEM) measurement (in spectrum mode)
●
the spurious emission measurement (in spectrum mode)
●
the signal statistics (in spectrum mode)
MEAS CONFIG
Provides functionality to configure the measurement.
LINES
Provides functionality to control display and limit lines.
INPUT/OUTPUT
Provides functionality to configure inputs and outputs.
RUN SINGLE
Starts a single measurement.
RUN CONT
Starts a continuous measurement.
UNDO
Reverts the last operation.
REDO
Repeats previously reverted operation.
3.1.1.2
Touchscreen Display
All measurement results are displayed in the screen on the front panel. Additionally,
the screen display provides status and setting information and allows you to switch
between various measurement tasks. The screen is touch-sensitive, offering an alter-
native means of user interaction for quick and easy handling of the device.
Risk of touchscreen damage
Inappropriate tools or excessive force can damage the touchscreen.
Observe the following instructions when operating the touchscreen:
●
Never touch the screen with ball point pens or other sharp objects, use your fingers
instead.
As an alternative, you can use a stylus pen with a smooth soft tip.
●
Never apply excessive force to the screen. Touch it gently.
●
Never scratch the screen surface, for example with a finger nail.
●
Never rub the screen surface strongly, for example with a dust cloth.
For instructions on cleaning the screen, see
shows the touchscreen display of the R&S
ESRP. The individual ele-
ments are described in more detail in
Chapter 3.4, "Basic Operations"
Front and Rear Panel View