Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 944 / 1094

Remote Control
R&S
®
ESRP
941 User Manual 1175.7445.02 ─ 08
11.13.2 Creating a Test Report
● Configuring and Printing the Test Report .............................................................. 941
● Adding and Removing Datasets ............................................................................941
● Selecting Datasets for the Report ......................................................................... 943
11.13.2.1 Configuring and Printing the Test Report
Commands useful to configure and print the test report described elsewhere:
●
HCOPy:DEVice:LANGuage<1|2>
on page 929
●
HCOPy[:IMMediate<1|2>]
on page 931
●
MMEMory:NAME
on page 913
HCOPy:MODE
...............................................................................................................941
HCOPy:MODE <Mode>
Selects the output of the
HCOPy[:IMMediate<1|2>]
command.
Parameters:
<Mode> SCReen
HCOPy:IMMediate
prints the current screen contents.
REPort
HCOPy:IMMediate
generates a measurement report.
*RST: SCReen
Example: HCOP:MODE REPort
HCOP
Creates a file containing the measurement report.
11.13.2.2 Adding and Removing Datasets
HCOPy:TREPort:APPend
............................................................................................... 941
HCOPy:TREPort:NEW
................................................................................................... 942
HCOPy:TREPort:TEST:REMove
......................................................................................942
HCOPy:TREPort:TEST:REMove:SELected
.......................................................................942
HCOPy:TREPort:APPend
This command adds the current measurement results to the test report.
The saved data depends on the items you have selected with
HCOPy:TREPort:
ITEM:SELect
on page 934.
Working with Test Reports