Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 903 / 1094

Remote Control
R&S
®
ESRP
900 User Manual 1175.7445.02 ─ 08
Example: INP:PRES:STAT OFF
Turns off the preselector.
Manual operation: See "Preselector (On Off)" on page 355
INPut<ip>:UPORt:STATe <State>
This command toggles the control lines of the user ports for the AUX PORT connector.
This 9-pole SUB-D male connector is located on the rear panel of the R&S ESRP.
See the R&S ESRP Getting Started manual for details.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<State> ON | 1
User port is switched to INPut
OFF | 0
User port is switched to OUTPut
*RST:
1
Manual operation: See "User Port" on page 163
INPut<ip>:UPORt[:VALue]
This command queries the control lines of the user ports.
For details see
OUTPut:UPORt[:VALue]
on page 901.
Suffix:
<ip>
.
1 | 2
irrelevant
Example: INP:UPOR?
//Result: #B00100100
Pins 5 and 7 are active.
Manual operation: See "User Port" on page 163
OUTPut:IF[:SOURce] <Source>
This command selects the source of the IF output.
Parameters:
<Source> IF
Outputs the intermediate frequency.
OFF
Turns off the output of a signal.
VIDeo
Outputs the video signal (200 mV).
System Configuration