Quick Start
R&S
®
ESRP
57
User Manual 1175.7445.02 ─ 08
In addition, the taskbar becomes visible.
When you connect an external keyboard, you can access the "Start Menu" using
the "Windows" key or the [Ctrl] + [Esc] key combination.
All necessary system settings can be defined in the "Start > Settings" menu (for
required settings refer to the Windows
7 documentation and to the hardware descrip-
tion).
3.2.5.5
Accessing the Windows Taskbar
The Windows taskbar also provides quick access to commonly used programs, for
example Paint or WordPad. IECWIN, the auxiliary remote control tool provided free of
charge and installed by Rohde & Schwarz, is also available from the taskbar.
For details on the IECWIN tool, see the "Network and Remote Control" chapter of the
R&S
ESRP user manual.
To open the taskbar, press the "Windows" key or the [CTRL + ESC] key combination
on your keyboard.
3.2.6
Configuring the GPIB Interface
A GPIB interface is integrated on the rear panel of the instrument. You can set the
GPIB address and the ID response string. The GPIB language is set as SCPI by
default and cannot be changed for the R&S
ESRP.
For details on the GPIB interface see
Displaying the GPIB submenu
1. Press the [SETUP] key.
2. Press the "General Setup" softkey.
3. Press the "GPIB" softkey.
The submenu for setting the parameters of the remote control interface is dis-
played.
Setting the GPIB address
► In the "GPIB" menu, press the "GPIB Address" softkey.
The edit dialog box for the GPIB address is displayed. The setting range is from 0
to 30. If SCPI is selected as the GPIB language, the default address is 20.
Remote command:
SYST:COMM:GPIB:ADDR 20
Preparing for Use