Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 171 / 1094

Receiver Mode
R&S
®
ESRP
168 User Manual 1175.7445.02 ─ 08
Peak Search Mode (Peaks Subranges) ......................................................................168
No Of Peaks ................................................................................................................168
No of Subranges / Peaks per Subrange ..................................................................... 168
Peak Excursion ........................................................................................................... 169
Margin ......................................................................................................................... 169
Select Limit Line ..........................................................................................................169
Peak Search Mode (Peaks Subranges)
Selects the peak search mode.
"Peaks" Looks for a particular number of peaks over the complete scan range.
"Subranges" Divides the scan range into smaller subranges and looks for a partic-
ular number of peaks in each subrange.
Remote command:
CALCulate<n>:PEAKsearch|PSEarch:METHod
on page 649
No Of Peaks
Defines the number of peaks the R&S ESRP looks for during a peak search.
The range is from 1 to 500 peaks.
The number of peaks only takes effect if the peak search mode is "Peaks".
Remote command:
CALCulate<n>:PEAKsearch|PSEarch:SUBRanges
on page 649
No of Subranges / Peaks per Subrange
Defines the number of subranges for a subrange peak search and the number of
peaks that the R&S
ESRP looks for in each subrange.
Note that the maximum number of peaks is 500. Thus, the maximum number of peaks
per subrange depends on the number of subranges you have defined.
These parameters only take effect if the peak search mode is "Subranges".
Common Measurement Settings