Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 749 / 1094

Remote Control
R&S
®
ESRP
746 User Manual 1175.7445.02 ─ 08
Example: CALC:ESP:PSE:MARG 100
Sets the margin to 100 dB.
CALCulate<n>:ESPectrum:PSEarch|:PEAKsearch:PSHow <State>
This command marks all peaks with blue squares in the diagram.
Suffix:
<n>
.
Selects the measurement window.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:ESP:PSE:PSH ON
Marks all peaks with blue squares.
Manual operation: See "Show Peaks" on page 240
Retrieving Results
The following commands analyze and retrieve measurement results for SEM measure-
ments.
●
CALCulate<n>:LIMit<k>:FAIL?
on page 686
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer:RESult?
on page 689
●
TRACe<n>:DATA
on page 694
11.5.1.6 Performing EMI Measurements
The following commands configure and perform EMI measurements.
● Configuring the Measurement ...............................................................................746
● Performing a Peak Search ....................................................................................747
● Evaluating the Results .......................................................................................... 749
Configuring the Measurement
Commands useful to configure EMI measurements described elsewhere:
●
DISPlay[:WINDow<n>]:TRACe<t>:X:SPACing
on page 634
●
INPut:LISN:FILTer:HPAS[:STATe]
on page 654
●
INPut:LISN:PHASe
on page 655
●
INPut:LISN[:TYPE]
on page 655
●
[SENSe:]BANDwidth|BWIDth[:RESolution]
on page 639
●
[SENSe:]BANDwidth|BWIDth[:RESolution]:TYPE
on page 640
●
[SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 651
●
[SENSe:]SWEep:POINts
on page 802
Remote Commands in Spectrum Analyzer Mode