Appendix: LAN Interface
R&S
®
ESRP
1045
User Manual 1175.7445.02 ─ 08
14.1.4
Creating Users
After the software for the network has been installed, the instrument issues an error
message the next time it is switched on because there is no user named "instrument"
(= user ID for Windows automatic login) in the network. Thus, a matching user must be
created in Windows and in the network, the password must be adapted to the network
password, and the automatic login mechanism must then be deactivated.
The network administrator is responsible for creating new users in the network.
1. Press the "Windows" key on the external keyboard or the [CTRL + ESC] key com-
bination on your keyboard to access the operating system.
2. Select "Start > Settings > Accounts > Other users".
3. Select "Add someone else to this PC".
4. In the "Microsoft account" dialog box, enter the new user name and password.
5. Select "OK".
6. Select "Finish".
The new user is created.
14.1.5
Changing the User Password
After the new user has been created on the instrument, the password must be adapted
to the network password.
1. Press the "Windows" key on the external keyboard or the [CTRL + ESC] key com-
bination on your keyboard to access the operating system.
2. Press [Ctrl
+
Alt +
Delete], then select "Change a password".
3. Enter the user account name.
4. Enter the old password.
5. Enter the new password in the upper text line and repeat it in the following line.
6. Press [Enter].
The new password is now active.
14.1.6
Logging on to the Network
At the same time you log on to the operating system, you are automatically logged on
to the network. As a prerequisite, the user name and the password must be identical
under Windows and on the network.
Configuring the Network
