Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 170 / 1094

Receiver Mode
R&S
®
ESRP
167 User Manual 1175.7445.02 ─ 08
Remote command:
The suffix at
SCAN<range>
of the commands listed in Chapter 11.4.6.2, "Scan Table" ,
on page 643 defines the ranges.
Delete Range
Deletes the currently selected scan range.
Remote command:
not supported
Range 1 to 10
Configures the currently selected scan range.
You can use and configure up to 10 individual scan ranges. For each range you can
customize the following parameters.
●
Range Start / Range Stop
●
Frequency Stepsize
●
Resolution Bandwidth
●
Meas Time
●
Auto Ranging
●
RF Attenuation
●
Preamplifier
For more information see Chapter 5.1.3.3, "The Scan Table" , on page 123.
Remote command:
See
Chapter 11.4.6.2, "Scan Table" , on page 643
Prev / Next Range
Selects the scan range to the left or right of the currently selected scan range.
Remote command:
not supported
5.3.7.3 Peak Search
The "Peak Search" tab in the "Test Automation" dialog box contains functionality to
control the peak search.
Common Measurement Settings