Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 685 / 1094

Remote Control
R&S
®
ESRP
682 User Manual 1175.7445.02 ─ 08
Suffix:
<n>
.
irrelevant
<k> 1...8
Selects the limit line.
Parameters:
<InterpolType> LINear | LOGarithmic
*RST:
LIN
Example: CALC:LIM:LOW:SPAC LIN
CALCulate<n>:LIMit<k>:LOWer:STATe <State>
This command turns a lower limit line on and off.
Before you can use this command, you have to select a limit line with
CALCulate<n>:LIMit<k>:NAME
.
The limit check is turned on separately. For more information see "Using Frequency
Lines" on page 828.
Suffix:
<n>
.
irrelevant
<k> 1...8
Selects the limit line.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:LIM4:LOW:STAT ON
Switches on limit line 4 (lower limit).
CALCulate<n>:LIMit<k>:LOWer:THReshold <Threshold>
This command defines a threshold for relative limit lines.
The R&S ESRP uses the threshold for the limit check, if the limit line violates the
threshold.
Suffix:
<n>
.
irrelevant
<k> 1...8
Selects the limit line.
Parameters:
<Threshold> Numeric value that defines the threshold.
The unit depends on
CALCulate<n>:LIMit<k>:UNIT
.
*RST: -200 dBm
Example: CALC:LIM2:LOW:THR -35DBM
Defines an absolute threshold value for limit line 2.
Remote Commands in Receiver Mode