Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 935 / 1094

Remote Control
R&S
®
ESRP
932 User Manual 1175.7445.02 ─ 08
Example: HCOP:DEV:LANG BMP
Selects the data format.
HCOP:DEST 'MMEM'
Directs the hardcopy to a file.
MMEM:NAME 'C:\R_S\instr\user\Print.bmp'
Selects the file name. If the file Print.bmp already exists, it is
replaced.
HCOP
Saves the hardcopy output into the file Print.bmp.
Example: HCOP:MODE REPort
HCOP:DEV:LANG PDF
HCOP:TREP:NEW
HCOP
Creates a measurement report (in pdf format).
Usage: Event
SCPI confirmed
Manual operation: See "ScreenShot" on page 504
See "Print Screen" on page 514
See "Configuring and Printing the Test Report" on page 521
HCOPy[:IMMediate<1|2>]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on
MMEMory:NAME
. This command
adds a consecutive number to the file name.
The suffix <1|2> selects the printing device.
Example: HCOP:DEV:LANG BMP
Selects the data format.
HCOP:DEST 'MMEM'
Directs the hardcopy to a file.
MMEM:NAME 'C:\R_S\instr\user\Print.bmp'
Selects the file name.
HCOP
Saves the hardcopy output into the file Print.bmp.
HCOP:NEXT
Saves the hardcopy output into the file Print_001.bmp.
HCOP:NEXT
Saves the hardcopy output into the file Print_002.bmp.
Usage: Event
SCPI confirmed
Manual operation: See "Print Screen" on page 514
Documentation