Remote Control
R&S
®
ESRP
669
User Manual 1175.7445.02 ─ 08
Manual operation:
See
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt
This command positions the delta marker to the next higher trace minimum on the right
of the current value (i.e. ascending X values). The corresponding delta marker is acti-
vated first, if necessary.
If no next higher minimum value is found on the trace (level spacing to adjacent values
< peak excursion), an execution error (error code: -200) is produced.
Suffix:
<n>
.
Selects the measurement window.
<m>
Selects the marker.
Example:
CALC:DELT:MIN:RIGH
Sets delta marker 1 to the next higher minimum value to the
right of the current value.
Manual operation:
See
CALCulate<n>:DELTamarker<m>:MODE
<Mode>
This command selects the delta marker mode.
Suffix:
<n>
.
Selects the measurement window.
<m>
Selects the marker.
Parameters:
<Mode>
ABSolute
Delta marker position in absolute terms.
RELative
Delta marker position in relation to a reference marker.
*RST:
REL
Example:
CALC:DELT:MODE ABS
Absolute delta marker position.
CALCulate<n>:DELTamarker<m>[:STATe]
<State>
This command turns delta markers on and off.
If the corresponding marker was a normal marker, it is turned into a delta marker.
No suffix at DELTamarker turns on delta marker 1.
Suffix:
<n>
.
Selects the measurement window.
<m>
Selects the marker.
Remote Commands in Receiver Mode