Darkly Labs Emblaser 2, Установка

Страница: 1 / 13

Instructions for replacing the lid:
https://youtu.be/IAEpphbZOKk
Instructions for completing the 10 watt laser upgrade:
https://youtu.be/kvIuIzIUsPc
Installing 10w Laser unit – Emblaser 2
Here are the steps needed to replace the existing 5w laser unit with the 10w version.
Please follow them carefully and contact us if you run into any
problems: help@darklylabs.com
Tools Needed:

10W laser Unit

Metal bracket & plastic belt plate (attached together)

1x M3x35mm bolt

3x M2x5mm screws

Focus Calibration card

Torx T10-Security tool

Philips PH1 tool

Hex 2.5mm tool

Hex 1.3mm tool
Note: Your 10w laser upgrade is supplied with these required parts and tools.