Remote Control
R&S
®
ESRP
944
User Manual 1175.7445.02 ─ 08
Example:
HCOP:TREP:TEST:SEL:INV
Inverts the selection of dataset to be included in a test report.
Usage:
Event
Manual operation:
See
"Selecting Datasets for the Report"
HCOPy:TREPort:TEST:SELect:NONE
This command excludes all datasets from the test report.
Example:
HCOP:TREP:TEST:SEL:NONE
Removes all dataset from the test report.
Usage:
Event
Manual operation:
See
"Selecting Datasets for the Report"
11.13.3
Deprecated Commands (Test Report)
Following is a list of deprecated remote commands. The remote commands are still
supported to maintain compatibility to previous Rohde
&
Schwarz receivers (like the
R&S
ESU), but it is strongly recommended to use the command system in the way it is
meant to be used in the R&S
ESRP.
Legacy command
Replaced by
Comment
HCOPy:TREPort:ITEM:HEADer:
STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
DIAGram:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
FRESults:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
PAGecount:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
SCANtable:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
SRESults:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
TDSTamp:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
HCOPy:TREPort:ITEM:
TRANsducer:STATe
HCOPy:TREPort:ITEM:SELect
Items now selected by the command parameter.
11.14
Display Configuration
................................................................................ 945
Selecting Items to Store and Restore
................................................................... 952
Display Configuration