Quick Start
R&S
®
ESRP
28
User Manual 1175.7445.02 ─ 08
Allows you to define and use softkeys to load custom configurations.
Opens the root menu of the current application.
FREQ (CHANNEL)
Provides functionality to define frequency parameters, for example:
●
the center or receiver frequency
●
the frequency offset
(CHANNEL is for special applications)
SPAN
Provides functionality to configure the frequency span.
AMPT (SCALE)
Provides functionality to configure amplitude or level characteristics, for example:
●
the reference level
●
the attenuation
●
the input impedance
●
the scale of the level axis
●
the preamplifier
AUTO SET
Provides functionality to automatically define various parameters like the level or
frequency.
BW
Provides functionality to define the resolution and video bandwidth.
SWEEP
Provides functionality to configure the sweep, for example:
●
the measurement time
●
the number of measurement points
●
the measurement mode (single or continuous measurements)
TRACE
Provides functionality to configure data acquisition and analyze measured data,
for example:
●
the trace mode
●
the detector
TRIG
Provides functionality to configure triggered and gated measurements, for exam-
ple:
MKR
Provides functionality to activate and position absolute and relative markers
(markers and delta markers).
PEAK SEARCH
Performs a peak search for active markers.
If no marker is active, Marker 1 is activated and the peak search is performed for
it.
MKR FUNC
Provides additional analysis functions of the measurement markers, for example:
●
the frequency counter
●
the noise measurement
●
the phase noise measurement
●
the AM/FM audio demodulator
MKR
➙
Provides functionality to position and control markers, for example:
●
to position the marker on the center frequency
●
to define the marker search area
●
to configure the peak excursion
Front and Rear Panel View
