Remote Control
R&S
®
ESRP
934
User Manual 1175.7445.02 ─ 08
11.13
Working with Test Reports
Designing a Test Report Template
........................................................................ 934
.......................................................................................... 941
Deprecated Commands (Test Report)
.................................................................. 944
11.13.1
Designing a Test Report Template
Selecting the Test Report Contents
.......................................................................934
Designing the Header of the Test Report
..............................................................936
Defining the Contents of the Title Page
................................................................ 939
.............................................................................................939
11.13.1.1
Selecting the Test Report Contents
.......................................................................................934
........................................................................................ 934
HCOPy:TREPort:ITEM:DEFault
This command restores the default configuration of the test report regarding the infor-
mation that is part of the report (in the "Configuration" tab of the "Test Report Settings"
dialog box).
It also restores the default names of the header titles (in the "Header" tab of the "Test
Report Settings" dialog box).
Example:
HCOP:TREP:ITEM:DEF
Restores the default test report configuration.
Usage:
Event
HCOPy:TREPort:ITEM:SELect
'<Item>,<Item>,<Item>,...'
This command defines the type of information that a test report is made up out of.
Parameters:
<Item>
String containing the information you want to include in the test
report.
Note that the items, separated by commas, have to be written
into one string (see example below).
The available items depend on the application you are using.
See the tables below for a short description of each item.
Per default, some items are selected (see tables below).
Example:
HCOP:TREP:ITEM:SEL 'SETT,MARK,SRES,DIAG'
Each dataset consists of the measurement settings, marker
information, the scan results and a screenshot of the scan trace
(for Receiver channels).
Working with Test Reports