Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 679 / 1094

Remote Control
R&S
®
ESRP
676 User Manual 1175.7445.02 ─ 08
Parameters:
<Name> String containing the limit line name.
*RST:
REM1 to REM8 for lines 1 to 8
Example: CALC:LIM1:NAME 'FM1'
Assigns the name FM1 to limit line 1.
CALCulate<n>:LIMit<k>:TRACe <TraceNumber>
This command links a limit line to one or more traces.
Suffix:
<n>
.
irrelevant
<k> Selects the limit line.
Parameters:
<TraceNumber> Range: 1 to 6
*RST: 1
Example: CALC:LIM2:TRAC 3
Assigns limit line 2 to trace 3.
Manual operation: See "Select Traces to check" on page 186
CALCulate<n>:LIMit<k>:UNIT <Unit>
This command defines the unit of a limit line.
Upon selection of the unit DB the limit line is automatically switched to the relative
mode. For units different from DB the limit line is automatically switched to absolute
mode.
Suffix:
<n>
.
irrelevant
<k> Selects the limit line.
Parameters:
<Unit> DBM | DBPW | WATT | DBUV | DBMV | VOLT | DBUA |
AMPere | DB | DBUV_M | DBUA_M | DEG | RAD | S | HZ |
PCT | (unitless)
If you select dB as the limit line unit, the command automatically
turns the limit line into a relative limit line.
In spectrum mode, units deg, rad, s, Hz and PCT are unavaila-
ble.
*RST:
DBM
Example: CALC:LIM4:UNIT DBUV
Sets the unit of limit line 4 to dBµV.
Remote Commands in Receiver Mode