Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 140 / 1094

Receiver Mode
R&S
®
ESRP
137 User Manual 1175.7445.02 ─ 08
4. The level measurement on the current frequency is initiated after you press the
"Measure" softkey.
5. After the final measurement on the current frequency is done, the R&S ESRP
replaces the scan result in the peak list with the result of the final measurement. If
the frequency has drifted compared to the one of the prescan, it also updates the
frequency in the peak list.
6. The R&S ESRP moves to the next frequency in the peak list, positions the marker
on that frequency etc.
7. After all frequencies in the peak list are finished, the R&S ESRP opens the "Final
Peak List" with the results for the final measurement.
Note that it is possible to start with an automatic measurement and later change into
interactive mode. Likewise, it is possible to start measuring in interactive mode and
later change into automatic mode.
Hold Final Measurement ............................................................................................. 137
Automatic Final ........................................................................................................... 137
Interactive Final ...........................................................................................................137
Skip Frequency ........................................................................................................... 137
Get Maxhold ................................................................................................................138
Measure ...................................................................................................................... 138
Stop Final Measurement ............................................................................................. 138
Hold Final Measurement
Interrupts the final measurement and opens a submenu that contains functionality to
control the final measurement.
Data that has already been collected is kept in the memory.
Remote command:
HOLD
on page 609
Automatic Final
Selects an automatic final measurement.
See also Chapter 5.1.5, "Final Measurement" , on page 126.
Remote command:
[SENSe:]FMEasurement:AUTO
on page 612
Interactive Final
Selects interactive final measurements.
See also Chapter 5.1.5, "Final Measurement" , on page 126.
Remote command:
[SENSe:]FMEasurement:AUTO
on page 612
Skip Frequency
Skips the peak list entry the final measurement is due to measure next and proceeds
with the next peak.
Measurements and Result Displays