Remote Control
R&S
®
ESRP
619
User Manual 1175.7445.02 ─ 08
DISPlay:WINDow:SGRam:COLor:SHAPe
<Shape>
This command defines the shape and focus of the color curve for the spectrogram
result display.
Parameters:
<Shape>
Shape of the color curve.
Range:
-1 to 1
*RST:
0
DISPlay:WINDow:SGRam:COLor:UPPer
<Percentage>
This command sets the upper percentage boundary of the spectrogram.
Parameters:
<Percentage>
Statistical frequency percentage.
Range:
0 to 66
*RST:
0
Default unit: %
Example:
DISP:WIND:SGR:COL:UPP 95
Sets the start of the color map to 95%.
Manual operation:
See
DISPlay:WINDow:SGRam:COLor[:STYLe]
<ColorScheme>
This command sets the color scheme for the spectrogram.
Parameters:
<ColorScheme>
HOT
Uses a color range from blue to red. Blue colors indicate low lev-
els, red colors indicate high ones.
COLD
Uses a color range from red to blue. Red colors indicate low lev-
els, blue colors indicate high ones.
RADar
Uses a color range from black over green to light turquoise with
shades of green in between. Dark colors indicate low levels, light
colors indicate high ones.
GRAYscale
Shows the results in shades of gray. Dark gray indicates low lev-
els, light gray indicates high ones.
*RST:
HOT
Example:
DISP:WIND:SGR:COL GRAY
Changes the color scheme of the spectrogram to black and
white.
Remote Commands in Receiver Mode