Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 666 / 1094

Remote Control
R&S
®
ESRP
663 User Manual 1175.7445.02 ─ 08
<m> depends on mode
Selects the marker.
Example: CALC:MARK2:MIN
Positions marker 2 to the minimum value of the trace.
Usage: Event
Manual operation: See "Min" on page 181
CALCulate<n>:MARKer<m>:MINimum:RIGHt
This command positions a marker to the next higher trace minimum on the right of the
current value (i.e. in ascending X direction).
If no next higher minimum value is found on the trace (level spacing to adjacent values
< peak excursion), an execution error (error code: -200) is produced.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Example: CALC:MARK2:MIN
Positions marker 2 to the minimum value of the trace.
CALC:MARK2:MIN:RIGH
Positions marker 2 to the next higher minimum value to the right
of the current value.
Usage: Event
Manual operation: See "Next Mode" on page 181
CALCulate<n>:MARKer<m>[:STATe] <State>
This command turns markers on and off.
If the corresponding marker number is currently active as a deltamarker, it is turned
into a normal marker.
Suffix:
<n>
.
Selects the measurement window.
<m> depends on mode
Selects the marker.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:MARK3 ON
Switches on marker 3 or switches to marker mode.
Manual operation: See "Marker 1 / Marker 2 / Marker 3 / … Marker 16,/ Marker
Norm/Delta" on page 177
See "Marker Wizard" on page 178
Remote Commands in Receiver Mode