Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 172 / 1094

Receiver Mode
R&S
®
ESRP
169 User Manual 1175.7445.02 ─ 08
Remote command:
Number of subranges:
CALCulate<n>:PEAKsearch|PSEarch:SUBRanges
on page 649
Peaks per subrange:
CALCulate<n>:PEAKsearch|PSEarch:SUBRanges:PCOunt
on page 650
Peak Excursion
Defines the relative signal level to determine a peak during a peak search.
For more information see Chapter 5.1.4, "Peak List and Data Reduction" , on page 124.
Remote command:
CALCulate<n>:MARKer<m>:PEXCursion
on page 647
Margin
Defines an additional level margin relative to a limit line that is considered during a
peak search.
For more information see Chapter 5.1.4, "Peak List and Data Reduction" , on page 124.
Remote command:
CALCulate<n>:PEAKsearch|PSEarch:MARGin
on page 648
Select Limit Line
Applies one or more limit lines for the peak search.
For more information on limit lines see Chapter 5.4.3, "(Limit) Lines" , on page 184.
"Assign to
Trace" Assigns the limit line to one or more traces.
"Deselect all
Traces"
"Limitcheck
(On Off)" Turns the limit check on and off.
5.3.7.4 Peak Lists
The peak list dialog box is available for the prescan results and the final measurement
results. Both dialog boxes contain the same elements.
Common Measurement Settings