Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 945 / 1094

Remote Control
R&S
®
ESRP
942 User Manual 1175.7445.02 ─ 08
Example: Perform a measurement, then:
HCOP:TREP:NEW
Creates a new test report with the results of the first measure-
ment.
Perform another measurement, then:
HCOP:TREP:APP
Adds the results of the second measurement to the test report.
Usage: Event
Manual operation: See "Adding and Removing Datasets" on page 522
HCOPy:TREPort:NEW
This command creates a new test report.
Creating a test report deletes all previously saved datasets. The current measurement
results are added as the first dataset to the new report.
The R&S ESRP saves the data selected with
HCOPy:TREPort:ITEM:SELect
on page 934.
Example: HCOP:TREP:NEW
Creates a test report.
Usage: Event
Manual operation: See "Adding and Removing Datasets" on page 522
HCOPy:TREPort:TEST:REMove <Dataset>
This command deletes one of the datasets that are currently part of a test report.
Parameters:
<Dataset> Index number of the dataset as shown in the "Test Report Con-
tent Selection" dialog box.
If the index number is greater than the number of available data-
sets, the command returns an error.
Example: HCOP:TREP:TEST:REM 2
Deletes the second dataset from the current test report.
Manual operation: See "Adding and Removing Datasets" on page 522
HCOPy:TREPort:TEST:REMove:SELected
This command deletes all selected datasets that are currently part of a test report.
Working with Test Reports