Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 319 / 1094

Spectrum Measurements
R&S
®
ESRP
316 User Manual 1175.7445.02 ─ 08
└ Manual .......................................................................................................... 318
Start .............................................................................................................................318
Stop .............................................................................................................................318
Frequency Offset .........................................................................................................318
Signal Track (span > 0) ............................................................................................... 318
└ Track On/Off (span > 0) ................................................................................ 319
└ Track BW (span > 0) ..................................................................................... 319
└ Track Threshold (span > 0) ...........................................................................319
└ Select Trace (span > 0) .................................................................................319
Center
Opens an edit dialog box to enter the center frequency. The allowed range of values
for the center frequency depends on the frequency span.
span > 0: span
min
/2 ≤ f
center
≤ f
max
– span
min
/2
span = 0: 0 Hz ≤ f
center
≤ f
max
f
max
and span
min
are specified in the data sheet.
Remote command:
[SENSe:]FREQuency:CENTer
on page 790
CF Stepsize
Opens a submenu to set the step size of the center frequency.
The step size defines the value by which the center frequency is increased or
decreased when the arrow keys are pressed. When you use the rotary knob the center
frequency changes in steps of 10% of the "Center Frequency Stepsize".
The step size can be set to a fraction of the span (span > 0) or a fraction of the resolu-
tion bandwidth (span = 0) or it can be set to a fixed value manually.
Apart from the =Center , =Marker and Manual softkeys, the other softkeys are dis-
played depending on the selected frequency span.
0.1*Span (span > 0) ← CF Stepsize
Sets the step size for the center frequency to 10 % of the span.
Remote command:
FREQ:CENT:STEP:LINK SPAN
, see
[SENSe:]FREQuency:CENTer:STEP:LINK
on page 791
FREQ:CENT:STEP:LINK:FACT 10PCT
, see
[SENSe:]FREQuency:CENTer:STEP:
LINK:FACTor
on page 792
0.1*RBW (span > 0) ← CF Stepsize
Sets the step size for the center frequency to 10 % of the resolution bandwidth.
This is the default setting.
Remote command:
FREQ:CENT:STEP:LINK RBW
, see
[SENSe:]FREQuency:CENTer:STEP:LINK
on page 791
FREQ:CENT:STEP:LINK:FACT 10PCT
, see
[SENSe:]FREQuency:CENTer:STEP:
LINK:FACTor
on page 792
Configuration