Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 699 / 1094

Remote Control
R&S
®
ESRP
696 User Manual 1175.7445.02 ─ 08
CALCulate<n>:MARKer<m>:FUNCtion:POWer:PRESet <Standard> |
<UserStandard>
This command selects the power measurement setting for a standard and switches on
the corresponding measurement, if required.
The configuration for a standard comprises of the parameters weighting filter, channel
bandwidth and spacing, resolution and video bandwidth, as well as detector and sweep
time.
The settings for standards IS95A and C differ as far as the calculation method of chan-
nel spacings is concerned. For IS95A and J-STD008 the spacing is calculated from the
center of the main channel to the center of the corresponding adjacent channel, for
IS95C from the center of the main channel to the nearest border of the adjacent chan-
nel.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Setting parameters:
<Standard> Note that predefined standards go without quotes, while user
standards have to be in quotes ('user standard').
<Predefined standard>
Predefind standard according to table in "Predefined CP/ACLR
Standards" on page 716.
'<string>'
User-defined standard with <string> being the name of the user
standard.
Return values:
<Standard> <Predefined standard> | USER | NONE
<Predefined standard>
Predefind standard according to table in "Predefined CP/ACLR
Standards" on page 716.
USER
User-defined standard is set
NONE
not yet defined
with <string> being the name of a user standard. Note that pre-
defined standards go without quotes, while user standards have
to be in quotes ('user standard').
For further details refer to
"Predefined CP/ACLR Standards"
on page 716.
Example: CALC:MARK:FUNC:POW:PRES TETRA
Selects the standard setting for TETRA
Example: CALC:MARK:FUNC:POW:PRES 'my_aclr_standard'
Selects the user standard my_aclr_standard
Remote Commands in Spectrum Analyzer Mode