![background image](http://html1.mh-extra.com/html/omron/cj1w-c113-rev-02-2008/cj1w-c113-rev-02-2008_operation-manual_742339088.webp)
61
Connection of Unused Axes
Section 3-7
3-7
Connection of Unused Axes
This section provides connection examples for the CJ1W-NC213 and CJ1W-
NC233 in applications where not all axes are used.
3-7-1
Using Only the X Axis and Not the Y Axis on the CJ1W-NC213/
NC233 (with Unit Version 2.3 or Later)
On PCUs with unit version 2.3 or later, wiring is not required for the CW/CCW
limit input signal and the emergency stop input signal for specified unused
axes.
The following figure, based on
Example 2: Mode 1 Connection in 3-6 Connec-
tion Examples for Different Types of Motor Driver
, shows an example of con-
necting external I/O when only the X axis and not the Y axis is used on the
CJ1W-NC213/NC233. The limit input signal for the X axis is assumed to be
set as an N.C. connection.
To set only the X axis as the axis to be used, set the number of unused axes
to 01 in
Axis Parameter Designation
of
4-4 Common Parameter Area
.
The following table shows the relation for each Unit between the number of
unused axes and the settings.
Making this setting eliminates the need to perform wiring for the Y axis.
If other parameters are used in their default settings, the CW/CCW limit input
signal will be set to a N.C. contact input. Therefore, current will flow for the sig-
nal when the power supply for the inputs is connected.
Setting
1-axis Unit
2-axis Unit
4-axis Unit
0
All axes used.
All axes used.
All axes used.
1
Error 0013 occurs.
Axis Y not used.
Axis U not used.
2
Error 0013 occurs.
Error 0013 occurs.
Axes Z and U not used.
3
Error 0013 occurs.
Error 0013 occurs.
Axes Y, Z, and U not used.
X axis (used)
X axis (used)
Origin
proximity
input
signal
CCW limit
input signal
CW limit
input signal
Emergency
stop input
signal
N.C. contact
N.O. contact
Input
common
N.C. contact
N.C. contact
24 VDC
X axis (used)
X axis (used)
Y axis
(not used; no wiring required)
Y axis
(not used; no wiring required)
Y axis
(not used; no wiring required)
Y axis
(not used; no wiring required)
Position Control Unit
A20
A17
B17
A19
B19
A18
B18
A16
B16
Содержание CJ1W-C113 - REV 02-2008
