Omron CJ1W-C113 - REV 02-2008, Руководство по эксплуатации

Страница: 151 / 406

124
Writing Data with the WRITE DATA Bit Section 5-2
Operating Memory Area
Operating Data Area
Name Model Operating
memory area
Bit Contents
WRITE DATA NC4
@
3
NC2
@
3
NC1
@
3
n+1
n+1
n+1 12 Starts writing
data at the ris-
ing edge.
Data Transfer-
ring Flag NC4 @ 3
NC2 @ 3
NC1 @ 3
n+8
n+4
n+2 14 1: Data is being
transferred
0: Power up or
restart; trans-
fer completed;
transfer unsuc-
cessful
Name Model Operating
data area
Bit Contents
Number of write
words Same for
all models I 00 to 15
Write source area I+1 00 to 15
Write source word I+2 00 to 15
Write destination
address I+3 00 to 15
15 00
Specifies the number of words
to be written to the PCU.
Setting range: 0001 to 0304
Hex (1 to 772 words)
EM bank
designation
DM/EM
designation
15 08 07 00
Specifies the area where the
parameters and data written to
the PCU are set.
DM/EM designation:
0D: Designates DM Area
0E: Designates EM Area
EM bank designation:
Specifies the EM Area
bank number if the EM
Area is designated in bits
00 to 07.
Setting range: 00 to 0C
(banks 0 to C)
15 00
Specifies the beginning word
of the area in the DM or EM
Area used for setting parame
ters and data.
Setting range: 0000 to 7FFF
Hex (Word 0 to 32767)
15 00
Specifies the beginning
address of the area in the
PCU to which parameters and
data are written. For details of
the PCU's internal addresses,
refer to SECTION 4 Data Areas .