Omron CJ1W-C113 - REV 02-2008, Руководство по эксплуатации

Страница: 62 / 406

35
External I/O Circuitry Section 3-4
!Caution
Be sure to wire the 5-V DC pulse output power supply with the correct polarity.
Wiring with the polarity reversed will result in damage to internal elements.
Inputs
Note (1) The values in parentheses apply for the CJ1W-NC413 and
CJ1W-NC433.
(2) Either N.C. or N.O. can be specified using the axis parameters.
For details, refer to
4-3 Common Parameter Area
.
For details on connecting origin input signals, refer to page 44.
!Caution Use either the 24-V DC origin input signal or the 5-V DC origin input signal,
but not both. If both are connected it will damage the internal circuitry.
Do not connect the 5-V DC origin input signal input to any output circuit except
the line driver.
Output power supply, 24 VDC
4.7 k
Ω
(5.6 k
Ω
)
Positioning completed input signal
Input common
4.7 k
Ω
(5.6 k
Ω
)
External interrupt input (N.O. contact)
4.7 k
Ω
(5.6 k
Ω
)
Emergency stop (N.C. contact)
(see note 2.)
4.7 k
Ω
(5.6 k
Ω
)
Origin proximity input
(N.O./N.C. contact) (see
note 2.)
4.7 k
Ω
(5.6 k
Ω
)
CW limit input (N.O./N.C.
contact) (see note 2.)
4.7 k
Ω
(5.6 k
Ω
)
CCW limit input (N.O./N.C.
contact) (see note 2.)
4.7 k
Ω
(5.6 k
Ω
)
Origin input signal (24 V)
(N.O./N.C. contact) (see note 2.)
150
Ω
Origin input signal
(N.O./N.C. contact) (see
note 2.)
Origin common
Line driver output
A11/B11
A20/B20
A15/B15
A16/B16
A17/B17
A18/B18
A19/B19
A13/B13
A14/B14
A12/B12
560
Ω
(680
Ω
)
560
Ω
(680
Ω
)
560
Ω
(680
Ω
)
560
Ω
(680
Ω
)
560
Ω
(680
Ω
)
560
Ω
(680
Ω
)
560
Ω
(680
Ω
)