Comdial DXP Plus Series, Руководство пользователя

Страница: 961 / 1176

DXP Plus Programming lnsfrucfions
12.4
Route Tables (ARS)
Description:
The ARS feature interacts with the toll restriction feature. You must enter a number into the
toll restriction table and assign a route table (l-32) to it before the system can perform ARS on
the dialed number. The system will route only those numbers that you have both assigned a
route number and entered on the toll restriction table.
The route table entry specifies the following parameters:
over what line group the call will route,
whether the station is permitted to make a call on that group,
whether the dialed numbers must be modified to match that line group.
If a dialed number is not matched by an entry in the toll restriction table, it is routed by route
table 32-the default route table. The system defaults table 32 to use line group 16 and it
defaults line group 16 to use all lines. You must either remove all invalid lines from line group
16 or make table 32 inactive if you do not need default routing.
The entered numbers can be some of the same numbers that you enter as toll restriction numbers
or other numbers that are in addition to them. Either way, you can enter a maximum of toll
restriction and/or ARS numbers. Each entered number can be up to 16 digits long and can be
comprised of digits O-9
Plus
the “match any” digit if needed.
When the system accepts a number entry into the toll restriction table, it re-orders all of
the table entries. The system places a 0 after all other digits in the entries. Also, it
places a number with a leading I ahead same number without a leading
Programming:
To enter a number in the toll restriction table and assign a route table to it, proceed as follows,
1 Make a list of the numbers to be routed.
2 . Press CONTROL T for main menu.
3 . From main menu, select and press ENTER.
4 . From the toll restriction menu, select restriction tables and press ENTER.
5 . Select line number and press ENTER. (Press CONTROL and type for additional
page of line numbers).
6 . Type ARS number entry. Entry can be up to 16 digits long and can
include as “‘match any” symbol.
7 . Press TAB key to place cursor at route table entry column.
8 . Type l-32 to choose route table and press ENTER.
9 . Repeat steps 5-8 for all required ARS numbers.
When finished, press ESCAPE twice.
11. Type y to accept changes, n to reject them, or r to resume editing and press ENTER to end.
Selection Programming