Comdial DXP Plus Series, Руководство пользователя

Страница: 391 / 1176

Programming The DVA Station Features
Feature Name QuickQ Parameters
Personal Intercom* *
Name* *
Class Of Service (enter COS for master channel) *
Speed Dial Sets 3
Idle Line Priority None
Intercom Hunt List None
Group Intercom Access* *
Prime Type No Prime
—Line 1
—Line Group 1
—Intercom* *
Tone First Yes
Call Announce Beeps 1
Default Forward Type No Forward
—Intercom Forward To: *
—Forward Type Personal Calls
Forward Ring No-Answer Ring Busy No
Direct Ring None
Delayed Ring None
Day 1 Ring None
Day 2 Ring None
Night Ring None
Caller ID Ring No-Answer None
Ring No-Answer Rings 4
Personal Ring tone 1
LCD Contrast 5
Initiate Service Observe No
Service Observable No
Day Exception Number 1–3
Night Exception Number 1–3
SOHVA Beeps 6
SOHVA Groups None
Busy On SOHVA No
Pick-Up Groups 1
Through-Dialing No
Single Line TAP Call Wait Answer
Ring On Busy Yes
Allow Ringer Off No
Disabled No
Consoles Installed No
Console Ports None
Programming Port No
Automatic Attendant Transfer On Busy No
Headset No
Recall Call Forward No
Attendant No
—Alternate Attendant None
—Overflow Attendant None
Extended DTMF Dialing No
Softkeys Setup No
IST Hold Configuration No
Transfer Ring Cadence Cadence 1
Highlighted Features = Critical Settings
*QuickQ uses 16
DVA stations for
system operation.
Assign any personal
intercom numbers to
them that you wish.
These personal
intercom numbers
need not be
consecutive numbers;
however, they must
be in sets of four and
each set must be
from a particular
digital station board.
Name the DVA
stations DVA1
through DVA16 and
assign a group
intercom access
number (from 4265
through 4280) to
each DVA station.
(For example, assign
DVA1 to ext. 4265,
DVA2 to ext. 4266,
and so forth until you
assign DVA16 to ext.
4280)
Port *
Number *
Port
Type
Digital
Port
Model
Impact
24-Line
LCD
Speaker-
phone
Programming The DXP IMI66–109, Section Four
Programming The DXP 4 – 7