Comdial DXP Plus Series, Руководство пользователя

Страница: 907 / 1176

DXP Plus Programming Instructions
Toll Groups
Description:
You must identify the individual lines that you do not want users to use when they dial toll
restricted numbers. Do this by first assigning the lines to toll groups and then assigning those
toll groups to the restricted number. There are 32 toll groups available for line assignment.
Assign one, several, or all lines to any desired toll group or combination of toll groups as
needed.
See Section
II for complete toll restriction programming details.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line name or line number and press ENTER.
5. From line programming, type item number for toll group and press ENTER.
6. Type line number (l-240) and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Press ESCAPE to end..
8.1.13 DTMF Level
Description:
Adjust the audio level of the DTMF signals to a low (-5 db), medium (0 db), or high db)
setting. Certain sites may require a higher db level to over come line conditions that could
interfere with reliable dialing such as a long loop distance to the central office.
Programming:
1. Press CONTROL T for main menu.
2.
From main menu, select line and press ENTER.
3.
From line menu, select line programming and press ENTER.
4.
From line programming menu, type item number to select feature and press ENTER.
5.
Press SPACE bar for desired setting and press ENTER.
6
When finished, press ESCAPE twice.
7.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
8.
Repeat steps 4-7 for each line or press ESCAPE to end.
Busy Lead Defection (Auxiliary Equipment Interface)
Description:
When you enable this feature, the system can detect an off-hook condition in a telephony device
such as a modem, FAX machine, industry-standard telephone, or similar device that an installer
has connected to a line ahead of the system. When the system detects the off-hook condition, it
makes a busy indication appear at system stations that have this line appearance.
Programming:
Press CONTROL T for main menu.
2. From the main menu, select lines and press ENTER.
3. From the lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From the line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each line port or press ESCAPE to end.
Line Features
Programming 6-9