Comdial DXP Plus Series, Руководство пользователя

Страница: 929 / 1176

DXP Plus Programming Instructions
8.8.4 Remote COS Programming
Description:
DISA callers that have assigned authorization codes have access to advanced system features.
The features that they have access to are controlled by the station class of service that you
assign with this programming procedure. The intercom number that is associated with this
remote COS assignment is the same intercom number that is associated with the caller’s DISA
authorization code that you set using the Section 8.8.3 procedure.
Programming:
1.
2.
3 .
4.
5 .
6 .
7.
Press CONTROL T for main menu.
From main menu, select Intercom number and press ENTER.
From Intercom menu, select Modify Intercoms and press ENTER.
Enter intercom number and press ENTER. (Remember, this is the intercom number
that you set in
Section
8.8.4 to correspond with the DISA authorization code.)
Select Remote COS and press ENTER.
Enter station class of service number l-32 and press ESCAPE twice.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Remote Day Exception Number/Night Exception Number
Description:
A DISA caller may have access to an outside line where the toll restriction is based on the
DISA authorization code that is associated with a particular class of service. Remote day and
night exception numbers allow DISA callers to dial numbers that their toll restriction normally
prevents them from dialing. If a toll restriction table exception number matches one of the
exception numbers that you assign using this procedure, the DISA caller is allowed to dial the
number.
The exception number values that you can assign are 1 through 32 and NONE. You can assign
32 exception numbers to each DISA class of service. You also must assign one exception
number to each toll restriction table line entry (Section II. 7).
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for day exception number
and press ENTER.
6. Type day exception number (O-32) (n, nn, n-nn, or 0 for none) and press ENTER.
7. Repeat step 6 for night exception number.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
Line Features Programming 6-31