Comdial DXP Plus Series, Руководство пользователя

Страница: 450 / 1176

Programming Group Levels
By System Manager
Group Supervisors can only alter the parameters for their particular group but System Managers can use
this procedure to change any of the settings for any of the groups.
1. Select the
Group Programming
from the Manager window menu bar. A pull-down menu appears
with the names of all the groups on the system (Figure 3-12).
2. Select the group you require (either highlight it and press Enter or click on it with the mouse). A small
window appears offering you the chance to either sign through to that group or to abandon the action.
Select the action you wish to perform by clicking on the appropriate button.
3. No further action takes place if you select
N o
; however, you can choose another option from the
Manager window menu bar.
4. If you select Y e s , the system puts you at the Manager/Supervisor level. The screen will change to the
Supervisor screen where you will have access to all of the group Supervisor facilities. (These are
described in the Group Level Programming By Supervisor).
5. When you sign out from the Manager/Supervisor level, the system returns to the normal Manager
level. To log out from the system, make sure you are at the Manager window (and not at the
Manager/Supervisor window), and select the
S i g n O u t
option from the menu bar. The system
then displays the Sign In window showing the
S i g n I n
option menu bar. The system is now ready
for the next person to sign into the QuickQ system.
Figure 3-12. List of System Groups
GCA70-271 Programming QuickQ
Programming The QuickQ System 3-13