Comdial DXP Plus Series, Руководство пользователя

Страница: 654 / 1176

3.1.3 Using The Link Administration Menu Options
Selecting the Link Administration menu option provides additional options as follows:
1. Clear Port Statistics
2. Close DXP Link
3. Edit Port Configuration
4. Open DXP Link
The first line of the option screen shows the active serial port (example, “Board:0 Port:0").
3.1.3.1 Clearing Port Statistics
Selecting this option resets all of the monitored items on the “Link Statistics Screen” such as busy hour,
busy minute, and packets received.
3.1.3.2 Closing A Link
Selecting the close link option terminates the Telephony Services link established for the active serial
port. Any other active links are unaffected.
3.1.3.3 Editing Port Configuration
Selecting this option allows you to modify the following parameters:
•
Baud Rate
•
Link Name
•
Hardware Handshaking
•
Auto Link Initialization
Modify these parameters as follows:
1. Using the cursor keys, select the parameter you wish to modify.
2. Select a new value.
3. Press Esc to save your new values.
NOTE: The new values become effective the next time you load the DXP driver (see section 2.2,
“Installing The Software”).
3.1.3.4 Opening A Link
Selecting the open link option establishes a link to the system using the active serial port. Any other
active links to other systems are unaffected. If the server is unable to establish a link, the screen shows a
Link Failed message. If this occurs, verify cable connections and try again. If you are still unable to
establish a link, please refer to the “Trouble shooting” section in this document for other possible causes.
See also section 3.2.
3.1.4 Selecting An Active Serial Port
Use this menu option to select an active serial port from the list of available ports. The system driver
locates all available ports when it is loaded.
Installing The Telephone Services Interface GCA40–121
14 – Installing the Telephone Services Interface