2.3
Connecting The Server Through House Wiring
Before using house wiring to connect the server to the system, make a direct connection and test the
equipment for proper operation without the added complications sometimes caused by house wiring.
The recommended maximum hard-wired distance for server to system interconnection using 24-gauge
wire is 500 feet for a 9600-baud transmission rate.
1. Install a customer-supplied 9-pin to 25-pin adapter (if applicable), the kit-supplied software key, and
the kit-supplied 25-pin to modular adapter on the rear of the server as described in sections 2.1 and
2.2.
2. Plug one end of the kit-supplied line cord into the modular connector on the 25-pin to modular
adapter you installed in step 1. Plug the other end of the line cord into the modular jack on the
server-end of the house wiring.
3. Using a customer-supplied, standard 6-conductor line cord, plug one end of the line cord into the jack
on the system-end of the house wiring. Plug the other end of the line cord into the appropriate system
serial data port
4. If a connection problem occurs, refer to section 2.4 for a signal interconnect diagram. Using this
diagram and an ohmmeter, you can trace through all of the circuit paths between the server and
system to verify that you made the correct connections.
CAUTION
A standard 6-conductor line cord introduces a signal roll-over from one end to the other. You
must maintain this signal roll-over when you install the house wiring. The illustration below
shows this roll-over in place in the wiring from one modular jack to the other. The additional
roll-overs introduced by the connecting line cords negate one another and are not a factor for
consideration.
6
6
4
5
4
5
3
2
3
2
1
1
6 5 4 3 2 1
6 5 4 3 2 1
625A2-6
Modular
Jacks
Standard 6-conductor
Line Cords
To Serial Data
Port On Server
To Serial Data
Port on System
Standard
6-Conductor Line Cord
1
2
3
4
5
6
6
5
4
3
2
1
DXP029
Connecting The Server Through House Wiring
Installing The Telephone Services Interface
GCA40–121
10 – Installing the Telephone Services Interface
Содержание DXP Plus Series
