Comdial DXP Plus Series, Руководство пользователя

Страница: 885 / 1176

DXP Plus Programming Instructions
Button Mapping By Station (Square/Non-Square System)
Description:
Programming:
The system assigns certain functions to each of the station buttons as a default condition.
Re-assign the button functions with this programming feature. You can assign functions at a
first level or at a second level at each button Assign functions at the first level that require
status light feedback because the system does not provide status light feedback to buttons at the
second level (press CONTROL N to display the second level).
You can also use this procedure to map the buttons on a
console (press CONTROL N
to display the console buttons) but first you must use the Section 7.2.26 procedure to assign the
console to the station and name the console port.
To map the telephone buttons with features,
1 Press CONTROL T for main menu.
2 . From main menu, select stations and press ENTER.
3 . From stations menu, select button mapping and press ENTER.
4 . Type prime intercom number or previously assigned name and press
(Screen presents current button map for review.)
5 . Type first level button code and press ENTER.
6 . Type mnemonic of feature from list (below) and press ENTER. (Press and hold SHIFT
and type for mnemonic definitions-press any key to return to button map.)
NOTE: If you press ENTER typing a mnemonic, the system “blanks” that button.
Users can program “blanked” buttons as personal speed dial buttons.
7 Repeat steps 5 and 6 for all desired buttons.
8 . Press CONTROL N and repeat steps 5 and 6 for second level (or console).
9 . Press ESCAPE and repeat steps 4-8 for each station.
When finished, press ESCAPE twice.
To map dial pad buttons with speed dial numbers,
1. Repeat steps 1 through 4 from the previous procedure.
2 . Type dial pad button number (1-O) and press ENTER.
3 . Type
i
for intercom, for line, for line group, or
p
for prime line or last line used,
or
a
for automatic route selection and press ENTER.
4 . Type l-240 to choose line or type 1-16 to choose line group and press ENTER.
5 . Type speed dial number (up to 16 digits) and press ENTER.
6 . Repeat steps l-4 for all desired dial pad buttons and then repeat steps 7-9 from the
previous procedure.
7-64 Station Features Programming