Comdial DXP Plus Series, Руководство пользователя

Страница: 668 / 1176

Day 1 Ring
Use this procedure to choose the line ports that you want to ring at stations during the day 1 ringing mode time
period. Refer to the paragraph below titled, Day 1, Day 2, and Night Ringing Begin and End Times, to set the
beginning and ending times of this ringing.
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
7. Type a for add or r for remove and press ENTER.
6. Press CONTROL E to edit.
8. Type line port number (n,nn,nnn or n–nnn) and press ENTER.
9. When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4–10 for each station or press ESCAPE to end.
Day 2 Ring
Use this procedure to choose the line ports that you want to ring at stations during the day 2 ringing mode time
period. Refer to the paragraph below titled, Day 1, Day 2, and Night Ringing Begin and End Times, to set the
beginning and ending times of this ringing.
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Press CONTROL E to edit.
7. Type a for add or r for remove and press ENTER.
8. Type line port number (type as n,nn,nnn or n–nnn) and press ENTER.
9. When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-10 for each station or press ESCAPE to end.
Day 1, Day 2, And Night Ringing Begin And End Times
With this programming procedure, set the begin and end times of the day 1, day 2, and night ringing time periods.
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select system parameters and press ENTER.
4. From the system parameters menu, select day 1, day 2 or night ringing begin times
and press ENTER.
5. Type times in 24–hour format (hh:mm) and press ENTER.
6. Press ENTER (repeatedly if needed) to place cursor at next time desired setting.
7. Repeat step 5 and press ENTER.
8. Repeat steps 6 and 7 until all times are set and press ENTER.
9. When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-10 for each station or press ESCAPE to end.
Installing And Programming For ATI–D–1PT IMI89–208
Installing The ATI–D–1PT – 13