Avaya Communication Manager, Руководство администратора, Страница: 90 / 1854

Managing Phones
Using ACTR to Move Phones
90 Administrator’s Guide for Avaya Communication Manager
November 2003
When you enter always or once in the Automatic Moves field on the Station screen, Communication
Manager adds the extension to its ACTR Move List database. When the phone is plugged in,
Communication Manager asks the phone for its serial number and records the serial number on the
ACTR Move List. If you change the entry in the
Automatic Moves field from always or once to no,
Communication Manager removes the extension from the Move List.
Call processing
When a phone is unplugged while on a call, and a 6400 Serialized phone or a 2420 phone that is
administered for automatic moves is plugged into the port within 60 seconds:
•
both extensions are placed in idle state
•
active calls on either extension are dropped, unless the call is active on a bridged appearance at
some other phone
•
held calls remain in a hold state
•
any calls ringing on either extension instantly proceed to the next point in coverage or station
hunting path, unless the call is ringing on a bridged appearance at some other phone
•
user actions that were pending when the new phone was plugged in are aborted
Design considerations
You can use the
list station movable
command to keep track of extensions on the move list. Once you
reach the maximum number, Communication Manager does not allow additional extensions.
Administration
Before you start
•
Be sure the
TTI
field on the Feature-Related System Parameters screen is set to y.
Tasks
Before you move a phone in your system, set the TTI State field to voice on the Feature-Related System
Parameters screen.
Moving phones
You can allow a phone to be unplugged from one location and moved to a new location without
additional administration on Avaya Communication Manager.