manualshive.com logo in svg

Avaya Communication Manager, Руководство администратора, Страница: 599 / 1854

Поделиться
Скачать
Avaya Communication Manager Скачать руководство пользователя страница 599

Phone Reference

Internet Protocol (IP) Softphones

Administrator’s Guide for Avaya Communication Manager

599

November 2003

Internet Protocol (IP) Softphones

IP Softphones can turn a PC or a laptop into an advanced telephone. Using the Internet Protocol (IP) 
network, you can place calls, take calls, and handle calls on your PC. With certain exceptions, every 
feature available for wired-endpoint voice calling is available for IP-based calling; it supports 
internetworking with conventional circuit-switched stations and trunks.

There are three softphone models that are fixed at the time of purchase and do not change afterward:

•

Avaya IP Softphone (for additional information, go to http://www.avaya.com/support, click on 

Telephones and End User Devices

, then scroll down to 

IP Telephony

 )

•

Avaya IP Agent (for additional information, go to http://www.avaya.com/support, click on 

Call 

Center/CRM

, then scroll down to 

IP Agent

)

•

Avaya Softconsole (for additional information, go to http://www.avaya.com/support, click on 

Call 

Center/CRM

, then scroll down to 

IP Telephony

 )

The connection for the end-point is supported whether the customer is directly connected using a network 
inter-face card (NIC) or the customer has dialed into their network using a dial-up point-to-point (PPP) 
account.   The connection is managed via a registration session with the Avaya server. The call server 
manages the voice connection directly to a circuit-switched telephone (Telecommuter configuration), 
directly to an IP Telephone (Control of IP Telephone configuration), directly to a DCP digital telephone 
(Control of DCP Telephone configuration), or over UDP/RTP to the IP Softphone’s iClarity IP Audio 
H.323 audio end-point (Road Warrior or VoIP configuration)

At any time, an end user can put a softphone into one of the following modes by changing a software 
menu:

•

Road-Warrior (Voice over IP (VoIP))

•

Telecommuter

•

Native H.323 (only available with Avaya IP Softphone R2)

•

Control of IP Telephone (only available with IP Softphone R4 and later)

•

Control of DCP Telephone (only available with IP Softphone R5 and later)

NOTE:

Beginning with the November 2003 release of Communication Manager, R1 and R2 
IP Softphone and IP Agent, which use a dual connect (two extensions) architecture, are no 
longer supported. R3 and R4 IP Softphone and IP Agent, which use a single connect (one 
extension) architecture, continue to be supported. This applies to the RoadWarrior and the 
Telecommuter configurations for the IP Softphone. Native H.323 registrations for R1 and 
R2 Softphones continue to be supported.

Road-warrior mode

The road-warrior (VoIP) mode enables travelers to use Communication Manager features from temporary 
remote locations, such as a hotel room. The road-warrior configuration uses two separate software 
applications running on a user’s PC that is connected to Communication Manager over an IP network. 
The single network connection carries two channels: one for call-control signaling and one for voice. IP 
Softphone software handles the call signaling and an H.323 V2-compliant audio application such as 
Avaya iClarity, which is installed with Avaya IP Softphone Release 3 and later (or a third-party 
application, like Microsoft

®

 NetMeeting

® 

) handles the voice communications. The user’s PC provides 

the audio connection via a microphone and speakers.

Содержание Communication Manager































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов