Avaya Communication Manager, Руководство администратора, Страница: 107 / 1854

Managing Phones
Setting up Remote Office
Administrator’s Guide for Avaya Communication Manager 107
November 2003
Instructions
Set up the signaling group for remote office:
1
Type add signaling-group and the number of the group you want to add.
The Signaling Group screen appears.
2
In the Group Type field, type
H.323
.
3
In the
Remote Office
field, type y .
4
In the Trunk Group for Channel Selection field, type the number of the trunk you set up for the
remote office.
5
In the
Near-end Node Name
field, identify the node name assigned to the CLAN that supports
the R300.
6
In the Far-end Node Name field, identify the node name assigned to the CLAN that supports the
R300.
7
In the
Near-end Listen Port
field, type a port number in the 5000-9999 range.
8
In the Far-end Listen Port field, type 1720. See Getting Started with the Avaya R300 Remote
Office Communicator for more details.
9
In the
RRQ
field, type y .
10
Tab to the Direct IP-IP Audio Connection field on another page of this screen and type
y
.
11
Press
ENTER
to save your changes.
add signaling-group 6 Page 1 of 5
SIGNALING GROUP
Group Number 6 Group Type: H.323
Remote Office? y Max Number of NCA TSC: ___
Max number of CA TSC: ___
Trunk Group for NCA TSC: ___
Trunk Group for Channel Selection: 6
Supplementary Service Protocol: _
Near-end Node Name: clan Far-end Node Name: remote office 6
Near-end Listen Port: 5001 Far-end Listen Port:5055
LRQ Required? _ Calls Share IP Signaling Connection? _
RRQ Required? y
Bypass If IP Threshold Exceeded? _
Interworking Message: ________