Avaya Communication Manager, Руководство администратора, Страница: 489 / 1854

Administering Media Servers
Call-processing administration
Administrator’s Guide for Avaya Communication Manager 489
November 2003
2
From the menu bar across the top of the screen, select Phones, then select Connection List.
The system displays the Connections window.
3
From the menu bar across the top, select Connection, then select New Connection.
The system displays the Connection Settings window.
4
Put in a name for the connection. Usually, this will be the name of your Media Server.
5
In the Host window, click Telnet.
6
Click the Emulation tab at the top.
The system displays the Emulation tab.
7
From the Emulator dragdown box, select the emulator you desire, usually 513BCT (default),
AT&T 4410, AT&T or DECVT100.
8
In the Keyboard window, select pbx.
9
Click the Modem tab.
The system displays the Modem tab.
10
In the IP address field, type the IP address of the connection’s Dialup Status box as noted in Step
9 on page 487 .
11
In the TCP/IP port number field, type 5023 to log in directly to the Communication Manager SAT
command line.
12
In the Modem field, use the dragdown box to select the type of modem that your PC uses.
13
In the Serial port field, select the COM port you are using for your modem connection.
14
In the Baud rate field, select 9600 from the dragdown box.
15
Click the Dial Numbers tab.
The system displays the Display Numbers tab.
16
Type the phone number of the Media Server as appropriate. Enter 1 in the Country Code field for
long-distance.
17
Click OK.
18
On the Connections window, double-click. the name of the connection you just set up.
The PC dials up the Media Server, and when connected, the login prompt for the Communication
Manager software appears.
19
Log in to Communication Manager to access the SAT command prompt screen.
Configure Avaya Site Administration
When Avaya Site Administration is initially installed on a client machine, it needs to be configured to
communicate with Communication Manager on the Media Server.
When it runs initially, after downloading, you need to create a new entry for the switch connection. To
create new entries for the switch, follow the procedure
Adding a Switch Administration Item on page
490.