Avaya Communication Manager, Руководство администратора, Страница: 1310 / 1854

Screen Reference
Trunk Group
1310 Administrator’s Guide for Avaya Communication Manager
November 2003
Seize Ack Send (msec)
This field appears only if the Trunk Type field is dis and the trunk group Direction field is incoming or
two-way. Only TN2140 ports receive this timer.
Send Incoming/Outgoing Disconnect Timers
to TN465 Ports
The field appears only for a co, fx, or wats trunk group.
END TO END SIGNALING
Pause (msec)
THis field is administrable only if the
Trunk Type
field is blank. All CO, DIOD, and tie circuit packs that
accept administrable timers accept this timer. However, this timer is sent only to the following circuit
packs: TN464B (or later), TN767, TN436B, TN459B, TN2146, TN2199, and TN2242, and TN429 and
TN2184 ports in a DID trunk group.
Tone (msec)
This field appears only if the
Trunk Type
field is blank. All CO, DIOD, and Tie circuit packs that accept
administrable timers accept this timer. This timer is also sent to the following circuit packs: TN464B (or
later), TN767, TN436B, TN459B, TN2146, TN2199, TN429, TN2184 ports in a DID trunk group.
Valid entries Usage
10 to 990 in
increments of
10 Enter the duration of the seizure acknowledgment signal your server
running Communication Manager sends in response to an incoming
seizure.
Valid entries Usage
y/n Enter y if you want to send the incoming disconnect and outgoing
disconnect timer values to the trunk group ports that are on a TN465
board.
Valid entries Usage
20 to 2550 in
increments of
10 Enter the minimum acceptable interval (pause) between DTMF
tones sent from a hybrid phone.
Valid entries Usage
20 to 2550 in
increments of
10 Enter the duration of a DTMF tone sent when a button on a hybrid
phone is pressed.