manualshive.com logo in svg

Avaya Communication Manager, Руководство администратора, Страница: 1498 / 1854

Поделиться
Скачать
Avaya Communication Manager Скачать руководство пользователя страница 1498

Feature Reference
Class of restriction

1498

Administrator’s Guide for Avaya Communication Manager

November 2003

•

Call Forwarding All Calls

If a call is restricted between the forwarding and forwarded-to extensions, Call Forwarding is 
denied. Restrictions are always checked when Call Forwarding is activated, but not when a call is 
forwarded.

•

Call Vectoring

When a call is directed to a VDN extension, the COR of the caller and the VDN are compared to 
determine if the caller can access the associated call vector.

•

Class of Service (COS)

In some cases, the COR can be overridden by the COS. See the 

Trk-to-Trk Restriction Override

 

field documented with the 

Class of Service

 on page 696.

•

Controlled Restriction

Restrictions assigned via Controlled Restriction override COR restriction.

•

Emergency Access to Attendant

Emergency Access to Attendant calls are not restricted by COR.

Interactions for called-party and calling-party restrictions

•

Night Service

Night Service and Night Station — Trunk Answer From Any Station override Inward, Manual 
Terminating Line, and Public Restrictions.

•

Tie-Trunk Access

Incoming dial-repeating tie-trunk calls can be completed directly to an inward-restricted or 
public-restricted extension but cannot be extended by an attendant to an inward-restricted 
telephone.

•

Transfer

Incoming trunk calls cannot be transferred to an inward-restricted extension when a 3-way COR 
check is made.

Incoming trunk calls can be transferred from an unrestricted extension to an inward-restricted or 
public-restricted extension if the 3-way COR check on Conference is overridden.

Interactions for fully restricted service restrictions

•

Centralized Attendant Service (CAS)

Since COR information is not passed over Release Link Trunks (RLT), fully restricted service 
allows all CAS calls. Therefore, CAS allows a public network call to complete to a 
fully-restricted station.

•

Distributed Communications System (DCS)

Fully Restricted Service allows all DCS calls because COR information is not transparent for 
DCS. DCS can allow a public network call to be completed to a Fully Restricted station.

•

Power Failure Transfer

All authorization features are bypassed when the switch is in Emergency Transfer Mode. 

•

Hunt Group

The COR assigned to the Hunt Group is checked on calls redirected by the DDC or UCD of the 
hunt group. Extensions in the hunt group that have Fully Restricted Service can receive calls from 
the public network (via the hunt group) if the COR of the Hunt Group does not have Fully 
Restricted Service.

Содержание Communication Manager































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов