Avaya Communication Manager, Руководство администратора, Страница: 82 / 1854

Managing Phones
Adding New Phones
82 Administrator’s Guide for Avaya Communication Manager
November 2003
5
Dial a test call to confirm that the phone is in service.
If possible, call a phone with a display so the person answering can confirm that you entered the
correct extension number.
6
Repeat the process until all new phones have been installed.
7
For security reasons, you should disable this feature when you are done. At the system
administration terminal type change system-parameters features to access the Feature-Related
System Parameters screen.
8
Type n in the Customer Telephone Activation (CTA) Enabled field.
9
Press
ENTER
to save your changes.
10
Type save translations and press
ENTER
to permanently save the changes.
a
Fixing problems
If you misdial and the wrong extension is activated for the phone you are using, use the terminal
translation initialization (TTI) unmerge feature access code to “uninstall” the phone before you try again.
See “TTI separation from a telephone” for more information.
Adding New Phones
When you are asked to add a new phone to the phone system, what do you do first? To connect a new
phone you need to do three things:
•
find an available port
•
wire the port to the cross-connect field or termination closet
•
tell the telephone system what you’re doing
Before you can determine which port to use for the new phone, you need to determine what type of phone
you are installing, what ports are available, and where you want to install the phone.
To add an IP phone, see Adding an IP Telephone on page 100.
Gathering necessary information
1
Determine whether the phone is an analog, digital, ISDN, or hybrid set. You may also administer
a virtual phone, one without hardware at the time of administration.
You need this information to determine the type of port you need, because the port type and phone
type must match. If you do not know what type of phone you have, see the
Type
field on the
Station screen for a list of phones by model number.
2
Record the room location, jack number, and wire number.
You may find this information on the jack where you want to install the phone, recorded in your
system records, or from the technician responsible for the physical installation.