Avaya Communication Manager, Руководство администратора, Страница: 1177 / 1854

Screen Reference
Station
Administrator’s Guide for Avaya Communication Manager 1177
November 2003
LWC Reception
Mapping Mode
Controls the mode of operation in which the cell phone will operate when mapped to this XMOBILE
extension. An XMOBILE station can be bridged to a deskset. These restrictions/modes exist because the
COR of a bridge is ignored; instead the principal’s COR is used. This field allows an XMOBILE station
to function as a bridge and still be restricted.
When a cell phone is mapped to more than one XMOBILE station, then only one of the mapped
XMOBILE station may have origination or both as its Mapping Mode. Therefore, only one of the
XMOBILE stations mapped to the cell phone number is permitted to originate calls.
Map-to Station
This is the physical phone used for calls to a virtual extension. Do not use an xmobile, xdid or another
virtual extension.
Valid
entries
Usage
audix Enter audix if the messages are stored on the Audio Information
Exchange System.
none Enter none if LWC messages will not be stored.
spe Enter spe if LWC messages are stored in the system or on the switch
processor element (spe).
Valid entries Usage
both The cell phone can be used to originate and terminate calls
from its associated XMOBILE extension. This is the default
when the XMOBILE Type field is PHS or DECT.
none The XMOBILE station is disabled administratively and
cannot originate and terminate calls from its associated
internal extension.
origination The cell phone may be used only to originate calls from its
associated internal XMOBILE extension by dialing into the
office server running Communication Manager.
termination The cell phone may be used only to terminate calls from its
associated internal XMOBILE extension. This is the default
when the XMOBILE Type field is EC500.
Valid entries Usage
Valid extension number Enter the extension of the physical phone used for
calls to a virtual extension.