Avaya Communication Manager, Руководство администратора, Страница: 1467 / 1854

Feature Reference
Call detail recording
Administrator’s Guide for Avaya Communication Manager 1467
November 2003
•
Incoming Circuit Identification
(in-crt-id) — 3 digits
This field contains the member number of a trunk within a trunk group used for an incoming call.
For outgoing calls, this field is blank. Tandem calls contain both incoming and outgoing circuit
id-numbers.
The format of this field varies from record to record. For printer, Teleseer and 59-character
formats, the numbers appear inverted on the record. For example, the circuit ID 123 appears as
231 (tens, units, hundreds). If you want to change this to appear in hundreds, tens, units format
(123), use the Modified Circuit ID Display field on the CDR System Parameters screen.
•
Incoming TAC (in-trk-code) — 4 digits
This field contains the access code of the incoming trunk group.
•
INS (3 digits)
This field specifies the ISDN Network Service requested for a call. This field applies only to
ISDN calls. Each Network Specific Facility has a corresponding INS value, shown in
Table 55,
Network specific facility to INS mapping, on page 1467.
This field also appears as ISDN NSV (Network Service Value).
•
ISDN CC
The call charge supplied by the ISDN advice of charge function (see Receiving Call-Charge
Information on page 509).
•
ISDN NSV
See INS.
Table 55: Network specific facility to INS mapping
Network Specific Facility INS Value
OUTWATS Band 0
OUTWATS Band 1–255
33
34–288
Network Operator 324
Presubscribed Common Carrier Operator 325
Software Defined Network (SDN) 352
MEGACOM 800 353
MEGACOM 354
INWATS 355
Maximum Banded WATS 356
ACCUNET Digital Service 357
AT&T Long Distance Service 358
International 800 359
Multiquest 367