Avaya Communication Manager, Руководство администратора, Страница: 1301 / 1854

Screen Reference
Trunk Group
Administrator’s Guide for Avaya Communication Manager 1301
November 2003
Start Position
The value administered in this field must be coordinated with your central office. This field appears when
the
Country field is 15 and the Shuttle field is y.
Suppress # Outpulsing
Time (sec) to Drop Call on No Answer
This field appears if the Group Type field is co or diod and the Outgoing Dial Type field is mf, or if the
Group Type fUsed for DCS
NOTE:
This field cannot be activated if the trunk group number is greater than 255 or if the Trunk
Access code is more than 3-digits long.
If this field is y, you can administer ISDN-BRI trunk groups unless the
DCS Signaling
field is d-chan. In that case, remove the BRI trunks or set the
DCS Signaling
field to
bx.25 before submitting the screen.
Field descriptions for page 3 - Group Type co
The figure below shows a common configuration for page 3 of the Trunk Group screen when the Group
Type field is co. This screen is only an example, and the fields shown below may change or disappear
according to specific field settings. The field descriptions that follow may include fields from other group
types that are not shown on this example screen.
Valid entries Usage
1 to 9 Indicate which digit in the digit string is considered to be the
“previously sent” digit (see
Start B Signal on page 1300).
Valid entries Usage
y/n Enter y if end-to-end signaling begins with (and includes) “#”. The
final “#” is suppressed in cases where the system would normally
outpulse it. This field should be y when the Central Office (for
example, rotary) or any other facility treats “#” as an error.
Valid entries Usage
y/n Enter y if this trunk group will send and receive messages on a DCS
signaling link.