Avaya Communication Manager, Руководство администратора, Страница: 255 / 1854

Managing MultiMedia Calling
Multimedia Applications Server Interface
Administrator’s Guide for Avaya Communication Manager 255
November 2003
CDR
1
To get call detail records for calls over MMCX interfaces, set
CDR Reports
= y on the MASI
Trunk Group screen.
2
To get call records for calls over the ISDN-PRI trunk group, set CDR Reports =
y
on the
ISDN-PRI Trunk Group screen.
3
To track calls between a MASI terminal and other MASI terminals or Communication Manager
stations, enter the MASI terminal extension on the Intraswitch CDR screen.
4
Enter n in the Record Non-Call Assoc TSC field on the CDR System Parameters screen.
NOTE:
If you use the same PRI trunks for MASI and non-MASI calls, Avaya strongly
recommends that you do not enable CDR for these calls. Establish a separate trunk group
for non-MASI calls and set CDR Reports = n.
Coverage
To establish coverage from a MASI terminal to AUDIX:
1
Use the MMCX user interface to enter the AUDIX hunt group extension as the coverage point.
You cannot use Avaya Communication Manager coverage administration for MASI terminals.
2
If AUDIX ports are not administered in Avaya Communication Manager, you must administer
them.
3
Set up the MASI terminal as an AUDIX subscriber. Enter the MASI terminal extension in the
Extension
field on the Subscriber Administration screen.
To establish coverage from a MASI terminal to another MMCX terminal or Avaya Communication
Manager station:
1
Use the MMCX user interface to enter the desired extension as the coverage point for the MASI
terminal. You cannot use Avaya Communication Manager coverage administration for MASI
terminals.
Step 11 — Verify administration
You should make test calls from Avaya Communication Manager to MMCX, to ensure that you can
indeed place and receive calls.
Call an unattended MASI terminal. Verify that the call goes to AUDIX. Retrieve the call from the MASI
terminal. Verify that all works as expected.