Avaya Communication Manager, Руководство администратора, Страница: 389 / 1854

Managing Announcements
Managing VAL Announcements Using FTP
Administrator’s Guide for Avaya Communication Manager 389
November 2003
Deleting VAL announcements at a system
phone
See Deleting and Erasing Announcements on page 381.
Managing VAL Announcements Using FTP
This section includes information on setting up and terminating a file transfer protocol (FTP) session and
outlines tasks that you can do in an FTP session.
There are 3 basic components to an FTP session:
•
Setting up an FTP session
•
Performing tasks in an FTP session
•
Ending an FTP session
SECURITY ALERT:
!
Be sure to read and observe all of the Security Alerts regarding enabling and disabling the
VAL (TN2501AP or embedded G700 Gateway circuit packs) filesystem and FTP sessions
into it.
Setting up an FTP session
Setting up an FTP session into the VAL circuit pack involves:
1
Preparing the VAL circuit pack for the FTP session, which
•
allows an FTP session on an individual VAL circuit pack.
•
creates an ftp-login and ftp-password for that session.
2
Starting an FTP session from a computer or network management terminal. Before you can start
the FTP session, you need to know
•
the VAL circuit pack’s IP address from Step 1.
•
the VAL circuit pack’s ftp-login and ftp-password from Step 1.
Preparing the VAL circuit pack for the FTP
session
To prepare the VAL circuit pack for the FTP session, including setting the username and password:
1
At the SAT, type enable filesystem board board-location login ftp-username [3-6 characters]
ftp-password [7-11 characters] and press
ENTER
.
For example, the command:
enable filesystem board 01A11 login romeo shakespeare
enables an FTP session into the VAL circuit pack in Cabinet 1, carrier A, slot 11. The
ftp-username (3-6 characters) for this session is romeo, and the ftp-password (7-11 characters) is
shakespeare.