Avaya Communication Manager, Руководство администратора, Страница: 1535 / 1854

Feature Reference
Extended user administration of redirected calls
Administrator’s Guide for Avaya Communication Manager 1535
November 2003
•
Call Forwarding
When Call Forwarding is active, the status lamps for the active features for that extension are lit.
When Call Forwarding is deactivated, the status lamps for both Call Forward All and Call
Forward Busy/DA buttons for that extension are extinguished. Off-net forward destinations are
not allowed.
•
Distributed Communications System (DCS)
Assign a different telecommuting access extension for each server or media server. You can use
Extended User Administration of Redirected Calls from any of the DCS nodes, but you must dial
the extension of the node on which your station is defined before dialing the FAC.
•
Security Violation Notification (SVN)
Extended User Administration of Redirected Calls security violations are tracked and reported by
SVN for station security codes, if it is enabled.
•
Tenant Partitioning
The telecommuting access extension is always automatically assigned to Tenant Partition 1, so it
can be accessed by all tenants.
The tenant number of the extension administered must be accessible by the tenant number from
which the Extended User Administration of Redirected Calls FAC is dialed or the request is
denied. If the FAC is being dialed on site, the tenant number of the station or attendant must have
access to the tenant number of the extension administered. If the FAC is dialed off site, the tenant
number of the incoming trunk must have access to the tenant number of the extension
administered.
Related topics
See Setting Up Telecommuting on page 303 for information about configuring telecommuting.
See Telecommuting Access on page 1233 for information about and field descriptions on the
telecommuting screen.
See QSIG to DCS TSC Gateway on page 1114 for information about and field descriptions on the
Remote Access screen.
See Setting up Remote Access on page 314 for information about configuring remote access.
See Feature Access Code on page 801 for information about and field descriptions on the Feature Access
Code screen.
See Class of Service on page 696 for information about and field descriptions on the Class of Service
screen.
See Station on page 1157 for information about and field descriptions on the Station screen.
See Class of Restriction on page 682 for information about and field descriptions on the Class of
Restriction screen.
See Setting up Call Forwarding on page 309 for information about configuring call forwarding.
See Assigning Coverage Options on page 310 for information about assigning two coverage options.