red lion RAM-66 series Software Manual Download Page 231

Page: 231 / 294

Revised 2017-08-31

Automation Tab

Drawing No. LP0997-C

I/O Settings (RAM-9000 Models)

Sixnet

Series SN/RAM

6000 & RAM 9000 Software Manual

- 223 -

Output Range:

Select the type of signal to be supplied by the output channels.

Disabled:

This option will completely disable the output channel.

0-5 VDC:

When selected, the analog output will be configured to supply a DC voltage from 0-5 VDC. The

output voltage will be scaled to 0-32767 (decimal value in the IODB/Modbus Address field).

0-20 mA:

When selected, the analog output will be configured to supply a current from 4-20 mA. The

output voltage will be scaled to 0-32767 (decimal value in the IODB/Modbus Address field).

I/O Channels

Click on the

I/O Channels

button and the dialog window below appears. The I/O Channels dialog window will

provide a list of all the channels with their associated IODB/Modbus Address.

Summary of Contents for RAM-66 series







































































































































































































































































































Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands

red lion RAM-66 series, Software Manual

Search results

Summary of Contents for RAM-66 series

Reviews:

Related manuals for RAM-66 series

Brands by name

Popular brands