Network Tab
Revised 2017-08-31
Firewall
Drawing No. LP0997-C
- 88 -
Sixnet
®
Series SN/RAM
®
6000 & RAM 9000 Software Manual
Click on the
Finish
button. You will be returned to the Masquerade/NAT/DMZ Rules dialog window and the NAT
Rules table will now be populated with the recently entered data.
To delete an existing rule, select it in the table and click on the
Delete
button. To edit an existing rule, select it in the
table and click on the
Edit
button.
Click on the
Save
button for changes to be saved without activating the interface until you reboot the unit, the
Apply
button will save your settings and apply them immediately. To revert to the previous defaults, click on the
Revert
button.
Port
Allow/Forwarding
Rules
The Firewall Port Forwarding is used to configure routes from a small range of IP Addresses or all IP Addresses
through one or more interfaces to a designated IP Address located behind the Red Lion RTU or router.
Service Access (Allow) Rules:
The Service Access Rules option is used to define what ports, either as a
single port or a range of ports, are authorized access through the firewall on the Red Lion RTU or router.
